When working with subfloors, it is important to use the right screws. There are different types of screws for different types of subfloors. Here is a guide to help you choose the right screws for your project.
The Secret to the Strongest Subfloor: The Right Screws Matter
When it comes to subflooring, screws are an essential part of the equation. Not only do they hold the subflooring in place, but they also provide a solid foundation for the flooring that will go on top.
There are a few things to keep in mind when selecting screws for your subflooring project. First, make sure you select the right type of screw for the material you’re using. Second, pay attention to the length of the screw. And finally, make sure the screw is properly coated for weather resistance.
When it comes to the type of screw, you’ll want to use a screw that is specifically designed for subflooring. These screws are typically made from galvanized steel or stainless steel, and they have a sharp point that helps them penetrate the material.
As for the length of the screw, that will depend on the thickness of the subflooring. A good rule of thumb is to use a screw that is twice as long as the thickness of the material. So, if you’re using ¾-inch subflooring, you would want to use 1½-inch screws.
Finally, make sure the screws you select are properly coated for weather resistance. This is especially important if the subflooring will be exposed to the elements. Galvanized screws are a good option, as they’re designed to resist corrosion.
When it comes to screws, there’s no one-size-fits-all solution. But by following these tips, you can be sure to select the right screws for your subflooring project.
Create a Solid Subfloor with the Right Screws
There are a lot of screws out there. But which one is the best screw for subflooring? In this blog post, we’ll show you the different types of screws available and which one works best for your project.
The most important factor to consider when choosing a screw is the material you’re working with. Different screws are designed for different materials. For example, there are screws specifically for wood, metal, and drywall.
Another factor to consider is the size of the screw. screws come in a variety of sizes, from tiny screws used in electronics to giant screws used in construction. The size you need will depend on the project you’re working on.
Finally, you’ll need to decide on the type of head you want. The most common types are Phillips head and flat head. But there are also specialized heads for specific applications.
Once you’ve considered all of these factors, you’re ready to choose the best screw for your project.
If you’re looking for some option here is some for you to consider:
1. QuikDrive WSHL134S7 #7 x 1-3/4″ Subfloor Screw 2000ct
- Simpson Strong Tie WSHL134S7 #7 1-3/4 High Low Phosphates #2 Square 8d EQUIV 2M
- Ribbed flat head with nibs for easy countersinking
- 2 square drive (driver bit in each box; replacement bit model BIT2S)
2. B&C Eagle CS8X212YZ No 2 Square Drive 1000-Count 8 by 2-1/2-Inch Yellow Zinc Collated Subfloor Screws
- No.8 by 2-1/2-Inch, 50 Screws per strip
- No.2 Square Drive
- Sharp Type-17 Point
- Yellow Zinc Coated
- Coarse Thread, Wood to Wood
3. Metabo HPT SuperDrive Collated Screwdriver - 20″ Extension - 5/8″ to 3″ Screws - Ideal For Decking Installations - Drywall - Sub-Floor - Metal Framing - W6VB3SD2
- Includes: W6VB3SD2 Collated Screwdriver, #2 Phillips Bit, #2 Square Bit, #2 LOX Bit, Decking Nose Piece.
- POWER: Maximum speed of 2,600 RPM and an awesome torque rating of 139.6 in-lbs
- FASTENERS: Fastens screws from 5/8 In. to 3 In. and screw diameters from #6-#12
- APPLICATIONS: Decking and sub floor projects
- CORD: 24.6 Ft. cord that allows you to move around the jobsite without having to stop
- EXTENSION: 20 In.
- DEPTH ADJUSTMENT: Tool free depth adjustment: no need to reach in the tool box to change screw depth
4. B&C Eagle CS8X134YZ No 2 Square Drive 1000-Count 8 by 1-3/4-Inch Yellow Zinc Collated Subfloor Screws
- No.8 by 1-3/4-Inch, 50 Screws per strip
- No.2 Square Drive
- Sharp Type-17 Point
- Yellow Zinc Coated
- Coarse Thread
5. QuikDrive WSV134S #9 x 1-3/4″ Subfloor Screws T-25 2000ct
- Deep 6-lobe recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs.
- Redesigned tip and thread pattern provides easy starts and up to 25-percent less torque while driving, which results in up to 20-percent faster driving.
- The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks.
- WSV screws can be easily backed out, allowing for future access to floor cavities
- Yellow zinc coating; #9 x 1-3/4-inch; Head diameter: 0.333; Includes: 6-lobe T25 drive bit
6. PRIMESOURCE 2GCS1 1LB 8X2 CONST Screw
- Package weight: 1.2 lbs
- Designed for interior wood to wood application including cabinets, framing, shelving and subfloors
- Type 17 drill point creates own pilot point and eases driving
- Suitable for use on cabinets, framing, general woodworking, shelving and subfloors
7. QuikDrive WSV212S #9 x 2-1/2″ Subfloor Screws T-25 1500ct
- Deep 6-lobe recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs.
- Redesigned tip and thread pattern provides easy starts and up to 25-percent less torque while driving, which results in up to 20-percent faster driving.
- The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks.
- WSV screws can be easily backed out, allowing for future access to floor cavities
- Yellow zinc coating; #9 x 2-1/2-inch; Head diameter: 0.333; Includes: 6-lobe T25 drive bit
8. Senco 08F200Y Duraspin# 8 by 2″ Subfloor Collated Screw (1, 000per Box)
- 2-inch length
- No. 2 square flat head with no. 8 shank
- Coarse 2/3 thread with wax
- Yellow zinc finish
9. QuikDrive WSV2S #9 x 2″ Subfloor Screws T-25 2000ct
- Deep 6-lobe recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs.
- Redesigned tip and thread pattern provides easy starts and up to 25-percent less torque while driving, which results in up to 20-percent faster driving.
- The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks.
- WSV screws can be easily backed out, allowing for future access to floor cavities
- Yellow zinc coating; #9 x 2-inch; Head diameter: 0.333; Includes: 6-lobe T25 drive bit
10. Quik Drive PROSDDM35K Complete Combo Multi-Use Kit for Fastening Decks
- Auto Feed Driving System
- Complete System for fastening decks, subfloor, drywall and sheathing.
- Makita Professional Screwgun Included
- Limited Lifetime Warranty on Drive Head
- No tools needed to set up or break down tool system