If you’re working on a plywood subfloor, you’re going to need screws. But what kind of screws should you use? In this blog post, we’ll help you to choose the right one for your project.
Screws are the best fastener for a plywood subfloor
When it comes to screws for your plywood subfloor, there are a few things to keep in mind. First, you’ll want to make sure that the screws are the right size and type for the plywood you’re using. Second, you’ll want to make sure that the screws are installed correctly so that they don’t come loose over time.
Here are a few tips for choosing and installing the right screws for your plywood subfloor:
1. Choose the right size screw. The screw should be long enough to penetrate the plywood and reach the joist below, but not so long that it sticks out the other side.
2. Choose the right type of screw. For most subfloors, you’ll want to use screws that are specifically designed for plywood. These screws have a sharp point that penetrates the plywood easily and a wide head that helps to prevent the screw from pulling through the plywood.
3. Install the screws correctly. When installing the screws, be sure to predrill holes for them. This will help to prevent the plywood from splitting when you drive in the screws. Also, be sure to countersink the screws so that the heads are flush with the surface of the plywood.
When choosing screws for plywood subflooring, make sure to pay attention to the length. The screws should be long enough to penetrate the plywood, but they shouldn’t be so long that they come out the other side. If the screws are too long, they could damage the flooring above the plywood.
Best Screws for plywood subfloor
For plywood subflooring, you need to use screws that are specifically designed for the job. These screws will be strong enough to hold the plywood in place, but they won’t be so strong that they damage the plywood. Look for screws that are made from high-quality materials, such as stainless steel or zinc-coated steel.
If you’re working with plywood subflooring, you need to choose the right screws to make sure the job is done right. Here are the best screws for plywood subflooring, so you can get the job done quickly and efficiently.
1. Senco 08F200Y Duraspin# 8 by 2″ Subfloor Collated Screw (1, 000per Box)
- 2-inch length
- No. 2 square flat head with no. 8 shank
- Coarse 2/3 thread with wax
- Yellow zinc finish
2. Uncoupling Membrane 1/8″ Thick
- A MUST-HAVE FOR YOUR TILE INSTALLATION – Uncoupling membranes have quickly become a necessity in the process of ceramic or stone tile installation as it keeps the tile from cracks and fractures.
- PREVENT FRACTURES AND CRACKS – Some substrates like plaster or plasterboard lose their cohesive strength when they get wet, while wood substrate expands.
- EXCELLENT WATERPROOFING LAYER – Aside from uncoupling the tile from the substrate, these membranes also act as a great waterproofing layer that protects moisture-sensitive substrates like wood, metal or asphalt.
- QUICK AND EASY TO USE – These uncoupling membrane rolls are lightweight and easy to carry, making them extremely easy to install using your standard tools.
- PROTECT YOUR HOME INVESTMENT – Nobody wants to install tiles over cracked floors but what guarantee do we have that your newly-built concrete floors won’t have cracks or fractures years after? So to better protect your home, it’s best that you take precautionary measures and use these uncoupling membranes for your lovely abode.
3. WoodPro Fasteners AP8X2-1 Number-8 by 2-Inch All Purpose Wood Construction Screws
- 8 x 2″, Includes One 25mm T-20 Star Bit
- T-20 Star Drive, Torx(tm) Compatible
- Sharp Type-17 Point
- PPG Industries 1,000 Hour E-Coat
- 1LB NET WT., Approx. 160 Pieces
4. DAP 59184 QT RTU FLR Leveler
- Ideal for filling & leveling surfaces prior to the installation of carpeting
- Vinyl floor tile or sheeting
- Manufactured in United States
- Package Dimensions: 12.7″ L x 13.21″ W x 13.21″ H
5. Squeeeek No More/O’Berry Counter Snap Kit (#3232) for Hardwood Floors
- The Counter-Snap Hardwood Trim Screws are for stopping squeaks between the joists.
- The screw is scored so when driven through the fixture it snaps 1/4″ below the top of the hardwood.
- The small hole then can be filled with a wood filler to conceal the screw.
- Kit is for hardwood floors/NOT carpeted floors. Tool snaps screw at correct level for wood floors.
- Kit contains: 50 Screws, one driver bit, one counter snap fixture
6. O’Berry 3252 Squeeeeek No More Floor Screws 250 per Package (Original Version)
- Replacement screws for Squeeeeek-No-More Kits # 3233
- Scored to snap perfectly every time.
- Works with carpet or vinyl or hardwood floors
- Quantity per package: 250
7. Senco, DS440AC
- Mpn: DS440AC
- Imported from: Unknown
- Commercial Brand: Senco
- Country of origin: United States
8. Metabo HPT SuperDrive Collated Screwdriver - 20″ Extension - 5/8″ to 3″ Screws - Ideal For Decking Installations - Drywall - Sub-Floor - Metal Framing - W6VB3SD2
- Includes: W6VB3SD2 Collated Screwdriver, #2 Phillips Bit, #2 Square Bit, #2 LOX Bit, Decking Nose Piece.
- POWER: Maximum speed of 2,600 RPM and an awesome torque rating of 139.6 in-lbs
- FASTENERS: Fastens screws from 5/8 In. to 3 In. and screw diameters from #6-#12
- APPLICATIONS: Decking and sub floor projects
- CORD: 24.6 Ft. cord that allows you to move around the jobsite without having to stop
- EXTENSION: 20 In.
- DEPTH ADJUSTMENT: Tool free depth adjustment: no need to reach in the tool box to change screw depth
9. Screw It Again EMW5953260
- United States
- Application: Fixing stripped screw holes in all types of wood.
- Packaging Type: Clamshell
- Screw Included: No
- Capacity: 135 lb. Product Type: Wood Anchor
10. 1/8″ Uncoupling Membrane Underlayment (108 sqft (1x10m))
- Cost-effective – High-quality uncoupling membrane performs like leading brands and keeps you on budget.
- No more cracking – This tile underlayment membrane uncouples the movement between your substrate and your brand new stone, porcelain, or ceramic tiles to help prevent premature cracking.
- Waterproof – Ensure long-lasting work with a tile membrane moisture barrier that protects your subflooring.
- Use any mortar – The professional-grade polyethylene grid layer and anchoring fleece underside work seamlessly with any thinset mortar.
- Use any substrate – This uncoupling membrane for tile and other flooring can easily be laid on top of concrete, wood, OSB, or gypsum.